D-Link xstack DGS-3612G Instruction Manual page 143

disable igmp_snooping
Restrictions
Example usage:
To disable IGMP snooping on the Switch:
Example usage:
To disable forwarding all multicast traffic to a multicast-enabled router:
show igmp_snooping
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To show IGMP snooping:
xStack DGS-3612G Layer 3 Gigabit Ethernet Managed Switch CLI Manual
The Switch will then forward all multicast traffic to any IP router.
Entering this command without the parameter will disable igmp
snooping on the Switch.
Only administrator-level users can issue this command.
DGS-3612G:4#disable igmp_snooping
Command: disable igmp_snooping
Success.
DGS-3612G:4#
DGS-3612G:4#disable igmp_snooping forward_mcrouter_only
Command: disable igmp_snooping forward_mcrouter_only
Success.
DGS-3612G:4#
Used to show the current status of IGMP snooping on the Switch.
show igmp_snooping {vlan <vlan_name 32>}
This command will display the current IGMP snooping configuration
on the Switch.
<vlan_name 32> − The name of the VLAN for which to view the IGMP
snooping configuration.
None.
140