D-Link xstack DGS-3612G Instruction Manual page 173

DGS-3612G:4#show acct_client
Command: show acct_client
radiusAcctClient
---------------------------------------------------------------------------------------
radiusAcctClientInvalidServerAddresses
radiusAcctClientIdentifier
radiusAuthServerEntry
---------------------------------------------------------------------------------------
radiusAccServerIndex
radiusAccServerAddress
radiusAccClientServerPortNumber
radiusAccClientRoundTripTime
radiusAccClientRequests
radiusAccClientRetransmissions
radiusAccClientResponses
radiusAccClientMalformedResponses
radiusAccClientBadAuthenticators
radiusAccClientPendingRequests
radiusAccClientTimeouts
radiusAccClientUnknownTypes
radiusAccClientPacketsDropped
CTRL+C ESC q
show auth_client
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To view the current RADIUS authentication client:
xStack DGS-3612G Layer 3 Gigabit Ethernet Managed Switch CLI Manual
Quit SPACE n
Used to display the current RADIUS authentication client.
show auth_client
The show auth_client command is used to display the current
RADIUS authentication client currently configured on the Switch.
None.
Only administrator-level users can issue this command.
DGS-3612G:4#show auth_client
Command: show auth_client
radiusAuthClient
adiusAuthClientInvalidServerAddresses
radiusAuthClientIdentifier
radiusAuthServerEntry
radiusAuthServerIndex
radiusAuthServerAddress
radiusAuthClientServerPortNumber
radiusAuthClientRoundTripTime
radiusAuthClientAccessRequests
radiusAuthClientAccessRetransmissions
radiusAuthClientAccessAccepts
radiusAuthClientAccessRejects
radiusAuthClientAccessChallenges
radiusAuthClientMalformedAccessResponses 0
radiusAuthClientBadAuthenticators
radiusAuthClientPendingRequests
radiusAuthClientTimeouts
0
D-Link
0
1
10.53.13.199
0
0
0
0
0
0
0
0
0
0
0
Next Page Enter Next Entry
0
: 1
: 0.0.0.0
170
a All
D-Link
0
0
0
0
0
0
0
0
0
0
0