D-Link xstack DGS-3612G Instruction Manual page 84

show stp ports
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To show STP port 1:
DGS-3612G:4#show stp ports 1
Command: show stp ports 1
MSTP Port Information
----------------------
Port Index
External PathCost : Auto/200000 , Edge Port : No /No , P2P : Auto /Yes
Port Forward BPDU enabled
Msti Designated Bridge
----- ------------------
0 8000/0050BA7120D6
1 8001/0053131A3324
CTRL+C ESC q Quit SPACE n Next Page p Previous Page r Refresh
show stp instance_id
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the STP instance configuration for instance 0 (the internal CIST) on the Switch:
xStack DGS-3612G Layer 3 Gigabit Ethernet Managed Switch CLI Manual
Used to display the Switch's current instance_id configuration.
show stp ports <portlist>
This command displays the STP Instance Settings and STP Instance
Operational Status currently implemented on the Switch.
<portlist> − Specifies a range of ports to be configured. The beginning
and end of the port list range are separated by a dash. For example, 1-
4 specifies all of the ports between port 1 and port 4.
None
: 1 , Hello Time: 2 /2
Internal PathCost Prio
Used to display the Switch's STP instance configuration
show stp instance_id {<value 0-15>}
This command displays the Switch's current STP Instance Settings
and the STP Instance Operational Status.
<value 0-15> - Enter a value defining the previously configured
instance_id on the Switch. An entry of 0 will display the STP
configuration for the CIST internally set on the Switch.
None.
, Port STP enabled LBD: Yes
----------------- ----
200000 128
200000 128
81
Status Role
---------- ----------
Forwarding Root
Forwarding Master