D-Link xstack DGS-3612G Instruction Manual page 39

create snmp group
Restrictions
Example usage:
To create an SNMP group named "sg1:"
DGS-3612G:4#create snmp group sg1 v3 noauth_nopriv read_view v1
write_view v1 notify_view v1
Command: create snmp group sg1 v3 noauth_nopriv read_view v1
write_view v1 notify_view v1
Success.
DGS-3612G:4#
delete snmp group
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To delete the SNMP group named "sg1".
DGS-3612G:4#delete snmp group sg1
Command: delete snmp group sg1
Success.
DGS-3612G:4#
show snmp groups
Purpose
Syntax
Description
xStack DGS-3612G Layer 3 Gigabit Ethernet Managed Switch CLI Manual
messages.
write_view – Specifies that the SNMP group being created has write privileges.
notify_view − Specifies that the SNMP group being created can receive SNMP trap
messages generated by the Switch's SNMP agent.
• <view_name 32> − An alphanumeric string of up to 32 characters that is
used to identify the group of MIB objects that a remote SNMP manager is
allowed to access on the Switch.
Only administrator-level users can issue this command.
Used to remove an SNMP group from the Switch.
delete snmp group <groupname 32>
The delete snmp group command is used to remove an SNMP
group from the Switch.
<groupname 32> − An alphanumeric name of up to 32 characters that
will identify the SNMP group with which the new SNMP user will be
associated.
Only administrator-level users can issue this command.
Used to display the group-names of SNMP groups currently configured on
the Switch. The security model, level, and status of each group are also
displayed.
show snmp groups
The show snmp groups command displays the group-names of SNMP
groups currently configured on the Switch. The security model, level, and
status of each group are also displayed.
36