D-Link xstack DGS-3612G Instruction Manual page 265

Layer 3 gigabit ethernet managed switch
Hide thumbs Also See for xstack DGS-3612G:
Table of Contents

Advertisement

DGS-3612G:4#show ospf neighbor
Command: show ospf neighbor
IP Address of
Neighbor
---------------
10.48.74.122
Total Entries: 1
DGS-3612G:4#
show ospf virtual_neighbor
Purpose
Syntax
Description
Parameters
Restrictions
Usage example
To display the current OSPF virtual neighbor table:
DGS-3612G:4#show ospf virtual_neighbor
Command: show ospf virtual_neighbor
Transit
Area ID
------------
10.1.1.1
Total Entries : 1
DGS-3612G:4#
config ospf ipif
Purpose
Syntax
Description
Parameters
xStack DGS-3612G Layer 3 Gigabit Ethernet Managed Switch CLI Manual
Router ID of
Neighbor
--------------
10.2.2.2
Used to display the current OSPF virtual neighbor router table.
show ospf virtual_neighbor {<area_id> <neighbor id>}
This command will display the current OSPF virtual neighbor router table.
<area_id> − A 32-bit number in the form of an IP address
(xxx.xxx.xxx.xxx) that uniquely identifies the OSPF area in the OSPF
domain.
<neighbor_id> − The OSPF router ID for the neighbor. This is a 32-bit
number in the form of an IP address (xxx.xxx.xxx.xxx) that uniquely
identifies the remote area's Area Border Router.
None.
Router ID of
Virtual Neighbor Virtual Neighbor State
----------------
10.2.3.4
Used to configure the OSPF interface settings.
config ospf [ipif <ipif_name 12> | all] {area <area_id> | priority <value> |
hello_interval <sec 1-65535> | dead_interval <sec 1-65535> | authentication
[none | simple <password 8> | md5 <key_id 1-255>] | metric <value 1-65535>
| state [enable | disable] | passive [enable | disable]}
This command is used to configure the OSPF interface settings.
<ipif_name 12> − The name of the IP interface.
all - All IP interfaces.
area <area_id> - A 32-bit number in the form of an IP address (xxx.xxx.xxx.xxx)
that uniquely identifies the OSPF area in the OSPF domain.
priority <value> − The priority used in the election of the Designated Router (DR).
A number between 0 and 255.
Neighbor Neighbor
Priority
State
--------
------------
1
Initial
IP Address of
Virtual Neighbor
---------------
----------------
10.48.74.111
Exchange
262

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents