D-Link xstack DGS-3612G Instruction Manual page 134

enable ipif
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable the ipif function on the Switch:
disable ipif
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To disable the IP interface named "s2":
delete ipif
Purpose
Syntax
Description
Parameters
Restrictions
xStack DGS-3612G Layer 3 Gigabit Ethernet Managed Switch CLI Manual
Used to enable an IP interface on the Switch.
enable ipif {<ipif_name 12> | all}
This command will enable the IP interface function on the Switch.
<ipif_name 12> − The name of a previously configured IP interface to
enable. Enter an alphanumeric entry of up to twelve characters to define
the IP interface.
all – Entering this parameter will enable all the IP interfaces currently
configured on the Switch.
None.
DGS-3612G:4#enable ipif s2
Command: enable ipif s2
Success.
DGS-3612G:4#
Used to disable the configuration of an IP interface on the Switch.
disable ipif {<ipif_name 12> | all}
This command will disable an IP interface on the Switch, without altering its
configuration values.
<ipif_name 12> − The name previously created to define the IP interface.
all – Entering this parameter will disable all the IP interfaces currently
configured on the Switch.
None.
DGS-3612G:4#disable ipif s2
Command: disable ipif s2
Success.
DGS-3612G:4#
Used to delete the configuration of an IP interface on the Switch.
delete ipif {<ipif_name 12> | all}
This command will delete the configuration of an IP interface on the Switch.
<ipif_name 12> − The name of the IP interface to delete.
all – Entering this parameter will delete all the IP interfaces currently
configured on the Switch.
None.
131