D-Link xstack DGS-3612G Instruction Manual page 15

show switch
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the Switch's information:
xStack DGS-3612G Layer 3 Gigabit Ethernet Managed Switch CLI Manual
Used to display general information about the Switch.
show switch
This command displays general information about the Switch.
None.
Only Administrator-level users can issue this command.
DGS-3612G:4#show switch
Command: show switch
Device Type
MAC Address
IP Address
VLAN Name
Subnet Mask
Default Gateway
Boot PROM Version : Build 1.10.B06
Firmware Version
Hardware Version
System Name
System Location
System Contact
Spanning Tree
GVRP
IGMP Snooping
MLD Snooping
RIP
DVMRP
PIM
OSPF
TELNET
WEB
RMON
SSL status
SSH status
802.1x
Jumbo Frame
Clipaging
MAC Notification
Port Mirror
SNTP
Bootp Relay
DNSR Relay
VRRP
HOL Prevention State : Enabled
Syslog Global State
Single IP Management : Disabled
DGS-3612G:4#
: DGS-3612G Gigabit Ethernet Switch
: 00-10-20-33-45-00
: 10.58.44.77 (Manual)
: default
: 255.0.0.0
: 0.0.0.0
: Build 1.00.B62
:
:
:
:
: Disabled
: Disabled
: Disabled
: Disabled
: Disabled
: Disabled
: Disabled
: Disabled
: Enabled (TCP 23)
: Enabled (TCP 80)
: Disabled
: Disabled
: Disabled
: Disabled
: Off
: Disabled
: Disabled
: Disabled
: Disabled
: Disabled
: Disabled
: Disabled
: Disabled
12