D-Link xstack DGS-3612G Instruction Manual page 87

create multicast_fdb
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To create multicast MAC forwarding:
config multicast_fdb
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To add multicast MAC forwarding:
xStack DGS-3612G Layer 3 Gigabit Ethernet Managed Switch CLI Manual
DGS-3612G:4#create fdb default 00-00-00-00-01-02 port 5
Command: create fdb default 00-00-00-00-01-02 port 5
Success.
DGS-3612G:4#
Used to create a static entry to the multicast MAC address
forwarding table (database)
create multicast_fdb <vlan_name 32> <macaddr>
This command will make an entry into the Switch's multicast MAC
address forwarding database.
<vlan_name 32> − The name of the VLAN on which the MAC
address resides.
<macaddr> − The MAC address that will be added to the forwarding
table.
Only administrator-level users can issue this command.
DGS-3612G:4#create multicast_fdb default 01-00-00-00-00-01
Command: create multicast_fdb default 01-00-00-00-00-01
Success.
DGS-3612G:4#
Used to configure the Switch's multicast MAC address forwarding
database.
config multicast_fdb <vlan_name 32> <macaddr> [add | delete]
<portlist>
This command configures the multicast MAC address forwarding
table.
<vlan_name 32> − The name of the VLAN on which the MAC
address resides.
<macaddr> − The MAC address that will be added to the multicast
forwarding table.
[add | delete] − add will add ports to the forwarding table. delete will
remove ports from the multicast forwarding table.
<portlist> − Specifies a port or range of ports to be configured.
Only administrator-level users can issue this command.
84