D-Link xstack DGS-3612G Instruction Manual page 195

show cpu_access_profile
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To show the CPU filtering state on the Switch:
DGS-3612G:4#show cpu access_profile
Command: show cpu access_profile
CPU Interface Filtering State: Disabled
CPU Interface Access Profile Table
Access Profile ID: 1
================================================================================
MASK Option :
VLAN 802.1p
---------- ------
Access ID: 2
Ports: 1
---------------------
default
================================================================================
Total Entries: 1
DGS-3612G:4#
xStack DGS-3612G Layer 3 Gigabit Ethernet Managed Switch CLI Manual
DGS-3612G:4#
Used to view the CPU access profile entry currently set in the Switch.
show cpu access_profile {profile_id <value 1-5>}
The config cpu_interface_filtering state command is used view the current CPU
interface filtering entries set on the Switch.
profile_id <value 1-5> − Enter an integer between 1 and 5 that is used to identify
the CPU access profile to be deleted with this command. This value is assigned to
the access profile when it is created with the create cpu access_profile command
Only administrator-level users can issue this command.
Mode: Permit
TYPE : Ethernet
192