D-Link xstack DGS-3612G Instruction Manual page 125

Command
create address_binding ip_mac ipaddress
config address_binding ip_mac ipaddress
config address_binding ip_mac ports
show address_binding
delete address_binding
enable address_binding acl_mode
disable address_binding acl_mode
enable address_binding trap_log
disable address_binding trap_log
Each command is listed, in detail, in the following sections.
create address_binding ip_mac ipaddress
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To create address binding on the Switch:
xStack DGS-3612G Layer 3 Gigabit Ethernet Managed Switch CLI Manual
Used to create an IP-MAC Binding entry.
<ipaddr> mac_address <macaddr> {ports [<portlist> | all] | mode
[arp | acl]}
This command will create an IP-MAC Binding entry.
<ipaddr> The IP address of the device where the IP-MAC binding is
made.
<macaddr> The MAC address of the device where the IP-MAC binding
is made.
<portlist> - Specifies a port or range of ports to be configured for address
binding.
all – Specifies that all ports on the switch will be configured for address
binding.
mode – The user may set the mode for this IP-MAC binding settings by
choosing one of the following:
•
arp - Choosing this selection will set a normal IP-MAC Binding
entry for the IP address and MAC address entered.
•
acl - Choosing this entry will allow only packets from the source
IP-MAC binding entry created here. All other packets with a
different IP address will be discarded by the Switch. This mode
can only be used if the ACL Mode has been enabled in the IP-
MAC Binding Ports window as seen previously.
Only administrator-level users can issue this command.
Parameters
<ipaddr> mac_address <macaddr> {ports [<portlist> | all] |
mode [arp | acl]}
<ipaddr> mac_address <macaddr> {ports [<portlist> | all] |
mode {arp | acl]}
[<portlist> | all] state [enable | disable]
[ip_mac {[all | ipaddress <ipaddr> mac_address <macaddr>]}
| blocked {[all | vlan_name <vlan_name> mac_address
<macaddr>]} | ports]
[ip-mac [ipaddress <ipaddr> mac_address <macaddr> | all] |
blocked [all | vlan_name <vlan_name> mac_address
<macaddr>]]
122