D-Link xstack DGS-3612G Instruction Manual page 174

show auth_diagnostics
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the current authentication diagnostics for port 1:
show auth_session_statistics
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the current authentication session statistics for port 1:
xStack DGS-3612G Layer 3 Gigabit Ethernet Managed Switch CLI Manual
radiusAuthClientUnknownTypes
radiusAuthClientPacketsDropped
CTRL+C ESC q Quit
Used to display the current authentication diagnostics.
show auth_diagnostics {ports [<portlist> | all]}
The show auth_diagnostics command is used to display the current
authentication diagnostics of the Switch on a per port basis.
ports <portlist> − Specifies a port or range of ports to be displayed.
Only administrator-level users can issue this command.
DGS-3612G:4#show auth_diagnostics ports 1
Command: show auth_diagnostics ports 1
Port number : 1
EntersConnecting
EapLogoffsWhileConnecting
EntersAuthenticating
SuccessWhileAuthenticating
TimeoutsWhileAuthenticating
FailWhileAuthenticating
ReauthsWhileAuthenticating
EapStartsWhileAuthenticating
EapLogoffWhileAuthenticating
ReauthsWhileAuthenticated
EapStartsWhileAuthenticated
EapLogoffWhileAuthenticated
BackendResponses
BackendAccessChallenges
BackendOtherRequestsToSupplicant
BackendNonNakResponsesFromSupplicant
BackendAuthSuccesses
BackendAuthFails
CTRL+C ESC q Quit
Used to display the current authentication session statistics.
show auth_session_statistics {ports [<portlist> | all]}
The show auth_session statistics command is used to display the
current authentication session statistics of the Switch on a per port
basis.
ports <portlist> − Specifies a port or range of ports to be viewed.
all – Specifies that all ports will be viewed.
Only administrator-level users can issue this command.
SPACE n Next Page Enter
SPACE n Next Page Enter
171
0
0
Next Entry a All
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Next Entry a All