D-Link xstack DGS-3612G Instruction Manual page 280

enable authen_policy
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable the system access authentication policy:
DGS-3612G:4#enable authen_policy
Command: enable authen_policy
Success.
DGS-3612G:4#
disable authen_policy
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To disable the system access authentication policy:
show authen_policy
Purpose
Syntax
Description
Parameters
Restrictions
xStack DGS-3612G Layer 3 Gigabit Ethernet Managed Switch CLI Manual
Used to enable system access authentication policy.
enable authen_policy
This command will enable an administrator-defined authentication policy for
users trying to access the Switch. When enabled, the device will check the
method list and choose a technique for user authentication upon login.
None.
Only administrator-level users can issue this command.
Used to disable system access authentication policy.
disable authen_policy
This command will disable the administrator-defined authentication policy for
users trying to access the Switch. When disabled, the Switch will access the
local user account database for username and password verification. In
addition, the Switch will now accept the local enable password as the
authentication for normal users attempting to access administrator level
privileges.
None.
Only administrator-level users can issue this command.
DGS-3612G:4#disable authen_policy
Command: disable authen_policy
Success.
DGS-3612G:4#
Used to display the system access authentication policy status on
the Switch.
show authen_policy
This command will show the current status of the access
authentication policy on the Switch.
None.
None.
277