D-Link xstack DGS-3612G Instruction Manual page 175

DGS-3612G:4#show auth_session_statistics ports 1
Command: show auth_session_statistics ports 1
Port number : 1
SessionOctetsRx
SessionOctetsTx
SessionFramesRx
SessionFramesTx
SessionId
SessionAuthenticMethod
SessionTime
SessionTerminateCause
SessionUserName
CTRL+C ESC q
show auth_statistics
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the current authentication statistics for port 1:
DGS-3612G:4#show auth_statistics ports 1
Command: show auth_statistics ports 1
Port number : 1
EapolFramesRx
EapolFramesTx
EapolStartFramesRx
EapolReqIdFramesTx
EapolLogoffFramesRx
EapolReqFramesTx
EapolRespIdFramesRx
EapolRespFramesRx
InvalidEapolFramesRx
EapLengthErrorFramesRx
LastEapolFrameVersion
LastEapolFrameSource
CTRL+C ESC q
create 802.1x user
Purpose
Syntax
Description
Parameters
xStack DGS-3612G Layer 3 Gigabit Ethernet Managed Switch CLI Manual
Quit SPACE n
Used to display the current authentication statistics.
show auth_statistics {ports <portlist> | all]}
The show auth_statistics command is used to display the current
authentication statistics of the Switch on a per port basis.
ports <portlist> − Specifies a port or range of ports.
Only administrator-level users can issue this command.
Quit SPACE n
Used to create a new 802.1x user.
create 802.1x user <username 15>
The create 802.1x user command is used to create new 802.1x users.
<username 15> − A username of up to 15 alphanumeric characters in
l th
0
0
0
0
Remote Authentication Server
0
SupplicantLogoff
Trinity
Next Page Enter Next Entry
0
0
0
0
0
0
0
0
0
0
0
00-00-00-00-00-00
Next Page Enter Next Entry
172
a All
a All