D-Link xstack DGS-3612G Instruction Manual page 57

show storage_media_info
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To view the storage media accessory information:
ping
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To ping the IP address 10.48.74.121 four times:
xStack DGS-3612G Layer 3 Gigabit Ethernet Managed Switch CLI Manual
Used to view FLASH memory information on the Switch.
show storage_media_info
This command will display information regarding the internal
FLASH memory of the Switch. This command will display the
following information:
Drive: The name of the drive of the storage media accessory.
Media_Type: Description of the type of storage media accessory
currently in use.
Size: Description of the size of memory space available on the
storage media accessory.
Label: Description assigned to this storage media accessory.
FS_Type: Description of the type of format of this storage media
accessory.
None.
None.
DGS-3612G:4#show storage_media_info
Command: show storage_media_info
-----------------------------------------------------------------------------
Drive Media_Type
C: Flash
-----------------------------------------------------------------------------
DGS-3612G:4#
Used to test the connectivity between network devices.
ping <ipaddr> {times <value 1-255>} {timeout <sec 1-99>}
The ping command sends Internet Control Message Protocol (ICMP)
echo messages to a remote IP address. The remote IP address will
then "echo" or return the message. This is used to confirm
connectivity between the Switch and the remote device.
<ipaddr> - Specifies the IP address of the host.
times <value 1-255> - The number of individual ICMP echo
messages to be sent. A value of 0 will send an infinite ICMP echo
messages. The maximum value is 255. The default is 0.
timeout <sec 1-99> - Defines the time-out period while waiting for a
response from the remote device. A value of 1 to 99 seconds can be
specified. The default is 1 second
None.
Size Label FS_Type
16MB FLASH-A
54
FAT16