D-Link xstack DGS-3612G Instruction Manual page 144

show igmp_snooping group
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To show IGMP snooping group:
xStack DGS-3612G Layer 3 Gigabit Ethernet Managed Switch CLI Manual
DGS-3612G:4#show igmp_snooping
Command: show igmp_snooping
IGMP Snooping Global State
Multicast router Only
VLAN Name
Query Interval
Max Response Time
Robustness Value
Last Member Query Interval
Host Timeout
Route Timeout
Leave Timer
Querier State
Querier Router Behavior
State
Fast Leave
VLAN Name
Query Interval
Max Response Time
Robustness Value
Last Member Query Interval
Host Timeout
Route Timeout
Leave Timer
Querier State
Querier Router Behavior
State
Fast Leave
Total Entries: 2
DGS-3612G:4#
Used to display the current IGMP snooping group configuration on the Switch.
show igmp_snooping group {vlan <vlan_name 32>}
This command will display the current IGMP snooping group configuration on
the Switch.
<vlan_name 32> − The name of the VLAN for which to view IGMP snooping
group configuration information.
None.
: Disabled
: Disabled
: default
: 125
: 10
: 2
: 1
: 260
: 260
: 2
: Disabled
: Non-Querier
: Disabled
: Enabled
: vlan2
: 125
: 10
: 2
: 1
: 260
: 260
: 2
: Disabled
: Non-Querier
: Disabled
: Enabled
141