D-Link xstack DGS-3612G Instruction Manual page 64

show utilization
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the port utilization statistics:
Example usage:
To display the current CPU utilization:
clear counters
Purpose
Syntax
Description
Parameters
Restrictions
xStack DGS-3612G Layer 3 Gigabit Ethernet Managed Switch CLI Manual
Used to display real-time port and cpu utilization statistics.
show utilization [ports |cpu]
This command will display the real-time port and CPU utilization
statistics for the Switch.
ports - Entering this parameter will display the current port
utilization of the Switch.
cpu – Entering this parameter will display the current CPU utilization
of the Switch.
None.
DGS-3612G:4#show utilization ports
Command: show utilization ports
Port TX/sec RX/sec Util
------ ---------- ---------- ----
1 0 0
2 0 0
3 0 0
4 0 0
5 0 0
6 0 0
7 0 0
8 0 0
9 0 0
10 0 0
11 0 14
12 0 0
CTRL+C ESC q Quit SPACE n Next Page p Previous Page r Refresh
DGS-3612G:4#show utilization cpu
Command: show utilization cpu
CPU utilization :
--------------------------------------------------------------------------------------------
Five seconds - 15%
DGS-3612G:4#
Used to clear the Switch's statistics counters.
clear counters ports <portlist>
This command will clear the counters used by the Switch to compile
statistics.
<portlist> − Specifies a port or range of ports to be displayed.
Only administrator-level users can issue this command.
0
0
0
0
0
0
0
0
0
0
1
0
One minute - 25%
61
Five minutes - 14%