Replot
Normally, files are discarded after being processed and printed. The replot
function overrides this feature, preventing the file from being discarded. To
make extra copies/prints from the operating panel, you must select '
ENABLE
The default is 'off'.
Enabling replot
Press 'Program' to enter the main menu.
1
Select the 'C
2
Press 'next/select' to enter the 'C
3
Select the '
4
Press 'next/select' to enter the '
5
Select the required setting using the
6
Press 'next/select' to confirm the setting.
7
Press 'Program' to exit the main menu.
8
Setting the number of copies
This option enables you to print multiple prints of the file currently stored in
the printer's memory. The default is 0, and a maximum of 99 prints can be
made using this option.
This option is active only when replotting is enabled.
Note:
Defining the number of prints
Press 'Program' to enter the main menu.
1
Select the '#
2
Press 'next/select' to enter the '#
3
Select the required number of copies using the
4
Press 'next/select' to confirm the number of copies.
5
Press 'Program' to exit the main menu.
6
Advanced menu functions
'.
ONFIGURATION
' item using the
REPLOT
' item using the
COPIES
' item using the
ONFIGURATION
or
button
' menu.
REPLOT
or
button.
or
button.
'menu.
COPIES
or
button.
' menu.
or
button.
REPLOT
79