Dcc Channel - Network If - Alcatel-Lucent 1850 TSS-320 User Provisioning Manual

Menu bar
............................................................................................................................................................................................................................................................
Figure 3-35 DCC channel - Network IF
The DCC -> Network IF option displays a list of current configured OCn (Access
Identifier) with the type of DCC Channel and a panel NE Interface Details.
The NE Interface Details panel contains the following parameters:
Access Identifier - Specifies the Access Identifier of the facility.
•
DCC Channel - Specifies the DCC channel (Line or Section).
•
DCC Mode - Specifies the DCC Mode.
•
Lower Layer Mode - Specifies the Lower Layer Mode.
•
The panel has Save hyperlink to save the settings.
OSI ULC report
It allows to modify OSI upper layers stack parameters which are common to all the stack
interfaces of the NE (i. e., all the Line and Section DCC interfaces and the Customer
LAN).
Select Xcom -> DCC -> OSI ULC Report option as shown in
............................................................................................................................................................................................................................................................
8DG08136EAAA
Issue 3 July 2009
Xcom menu
Figure 3-36.
3 - 4 3