............................................................................................................................................................................................................................................................

Create BLSR

Purpose

This procedure allows the operator to create a Protecting or West OCn (OC3, OC12, OC48

and OC192) facility with a Protected or East facility. The UPSR (Unidirectional Path

Switched Ring) facility protection groups can be provisioned on a port-pair basis. For

UPSR, the STS1/STSxC facilities within the OCn that is designated to be the

Protected/WEST facility are designated as the Preferred facilities. The STS1/STSxC

facilities within the OCn that is designated to be the Protecting/EAST facility are

designated as the alternate STS1/STSxC facilities.

Select Protection -> BLSR options in the Menu bar.

Clicking on Create the following panel appears:

Figure 5-62 BLSR Creation

Table 5-22

Parameters.

Table 5-22 BLSR Panel Parameters

Parameter

FFP Access Identifier

5 - 94

"BLSR Panel Parameters"

provides the description of BLSR Panel

Description

It is referenced to the protected entity in the FFP (Fast

Facility Protection) group. The protecting entity is

automatically taken as the same port on the next adjacent

module.

Create BLSR

8DG08136EAAA

Issue 3 July 2009

Table of Contents

Show Quick Links

Quick Links:
Craft Terminal Overview
Example of Network Management Architecture
Alarms Menu

Hide quick links:

Chapters

Table of Contents

This manual is also suitable for:

1850 tss-160

Create Blsr; Blsr Panel Parameters; 8Dg08136Eaaa - Alcatel-Lucent 1850 TSS-320 User Provisioning Manual

Create BLSR

"BLSR Panel Parameters"

8DG08136EAAA

Hide quick links:

Chapters

Related Manuals for Alcatel-Lucent 1850 TSS-320

Related Content for Alcatel-Lucent 1850 TSS-320

This manual is also suitable for:

Table of Contents