Bridge Page -> Virtual Lan - Alcatel-Lucent 1850 TSS-320 User Provisioning Manual

Menu bar
............................................................................................................................................................................................................................................................
Bridge - Virtual LAN
Figure 3-30 Bridge page -> Virtual LAN
The page is made up of two panels and one table. The VLAN panel contains the following
attributes:
– Board Selection: The combo-box allows to select one of the data unit available in
– VLAN Range From: To: These item text boxes permit to find the VLANs
The VLAN table reports in tabular form, the VLAN identifiers, in the specified range,
already registered on the selected Data Board and, in the same row the relevant existing
Ethernet Ports on which a VLAN is registered.
Note:
LAGs, in case of "Agg Group Management") of the board are tabled. While in the
case of Provider Bridge all the existing (and activated) ETS and ETB ports (and
LAGs, in case of "Agg Group Management") of the board are presented.
IGMP Mng
IP hosts to report their host group memberships to any immediately neighboring multicast
routers use Internet Group Management Protocol (IGMP), a multicasting protocol in the
Internet protocols family. IGMP messages are encapsulated in IP datagram, with an IP
protocol number of 2. IGMP has versions IGMP v1, v2 and v3. From the application menu
bar, select Data -> IGMP Mng and the following page appears.
............................................................................................................................................................................................................................................................
3 - 38
the system; each data unit is identified by a label representing the unit and the
relevant position inside the rack, the shelf and slot occupation respectively (e.g. "
10XANY-1-1-24").
specified in that range, by clicking on Search functional button. A range of VLAN-
Id to be searched can be defined (e.g. from 151 to 201), the range cannot be greater
than 100; default is 1 to 100.
In the case of Virtualized, all the existing (and activated) ETB ports (and ETB
Data menu
8DG08136EAAA
Issue 3 July 2009