Alcatel-Lucent 1850 TSS-320 User Provisioning Manual page 325

Procedures
............................................................................................................................................................................................................................................................
Parameter
Ethernet Type (0x)
........................................................................................................................................................................................................................
Click Cancel to cancel the operation and return to the previous page.
4
........................................................................................................................................................................................................................
Click Save & continue to apply the changes and continue the configuration process.
5
........................................................................................................................................................................................................................
Click Save & Exit to apply the changes and the following page appears.
6
E
N D
........................................................................................................................................................
............................................................................................................................................................................................................................................................
8DG08136EAAA
Issue 3 July 2009
O S
F T E P S
Description
Allows to digit an hexadecimal value for the provider
protocol-type (PT) that is inserted into the 2-bytes field of
the Stacked-VLAN shim header; the value identifies the
network provider and has to be 2-bytes long in
hexadecimal notation; the third non-included byte is forced
by default to "0x". The PT is used to recognize the type of
afferent VLAN frames, i.e. if they are "S-Vlan-tagged" or
others; by default, an hex value of 88A8 is interpreted as S-
Vlan tagged. Frames with PT value different than this will
be treated as non-SVlan-tagged. An hex value of 8100 is
interpreted as Q-Vlan tagged. Other values of PT will be
interpreted as generic Stacked-Vlan frames, used to
interwork among different network providers
Create VLAN
5 - 6 5