Alcatel-Lucent 1850 TSS-320 User Provisioning Manual page 221

Tree area
............................................................................................................................................................................................................................................................
The panel has the Save hyperlink by means of which it is possible to store the settings.
The PM Mode sub-functional tab
Figure 4-25 PM Mode
The PM Mode sub-functional tab contains two panels.
The Set Performance Monitoring Mode page allows to set the mode of PM data
collection for the specified facility by:
•
•
– Near End
– Far End
– ALL
Clicking on the Default hyperlink it is possible to set the default value ALL.
•
– ALL PM for all applicable parameters is configured
– S PM for Section parameters is configured
– L PM for Line parameters is configured
............................................................................................................................................................................................................................................................
8DG08136EAAA
Issue 3 July 2009
Access Identifier: The entry box specifies the identifier of the unit resource. It is
also shown in the tree.
Location: The combo-box allows to specify the PM registers location to be
initialized. The allowable choices are:
Mode Type: The entry box specifies the PM mode type to be enabled or disabled.
The allowable choices are:
Access a resource
4 - 4 3