Alcatel-Lucent 1850 TSS-320 User Provisioning Manual page 254

Tree area
............................................................................................................................................................................................................................................................
Select Line DWDM
Figure 4-42 Select Line and OTU2 Line tab for DWDM module (e.g. XFP)
The Rack x > Shelf x > Board xx > Module xx tab page presents three panels and three
functional tabs in the following 1) to 4) points described.
1. Optical Transport Layer Unit 2 - Line Side panel
•
OTPORT-{1-7}-{1-9}-{2-9, 12-19, 21-
28, 29-36}-L1
OTPORT-{1-7}-{1-9}-{2-9, 12-19, 21-
28, 29-36}-C1
•
– NOFEC NO FEC (11GxAR client AID only)
............................................................................................................................................................................................................................................................
4 - 76
Access Identifier: It shows the entity access identifier in the <OTPORT>- <rack>-
<shelf>-<slot>-<side> format. It is also shown in the tree. They can be:
Forward Error Correction: It allows to set the type of Forward Error Correction
on a DWDM line and client side port. This parameter applies to client port Access
Identifier when the signal type is OTM0_2. The allowable values are:
OTU2 Line port, on an 11GxAR or
OT2TDM module
Client port on an 11GxAR module -
OTU2, OC192, 10GE ,10GFC
Access a resource
8DG08136EAAA
Issue 3 July 2009