............................................................................................................................................................................................................................................................

Control Plane - Signaling: Create Network Call

Purpose

The procedure allows an operator to establish one Network CALL between two user

access points in the network, defined by their TNA Address (Transport Network

Identifier). This CALL can go through multiple network domains, and have multiple

connections associated with a call.

Call is an end-to-end service connection, involving multiple domains, whereas a

connection is placed on local domain.

Select Control Plane -> CP TDM -> Signalling option in the Menu bar, then in the CP

Signaling page click on the Create Network CALL hyperlink or

Expand CTRLPLANE: CP -> TDM CP: CPTDM -> SIGNALING: CPSIG -> CALL:

CPCALL options in the Tree area, then in the CP Call page select CALL in the Link

Type combo-box and click on the Create hyperlink. The Create Call page appears.

N D

........................................................................................................................................................

Figure 5-27 Call Creation Page

The Create Call panel contains:

Call identifier: The entry box allows to digit the Call Identifier (Call ID) as call name

•

assigned by user in the Control Plane. Call ID significance is related to Description

parameter.

8DG08136EAAA

Issue 3 July 2009

T E P S

Control Plane - Signaling: Create Network Call

5 - 3 7

Table of Contents