Create Igmp; Igmp Configuration Panel Parameters - Alcatel-Lucent 1850 TSS-320 User Provisioning Manual

Procedures
............................................................................................................................................................................................................................................................

Create IGMP

Purpose
IP hosts to report their host group memberships to any immediately neighboring multicast
routers use Internet Group Management Protocol (IGMP), a multicasting protocol in the
Internet protocols family. IGMP messages are encapsulated in IP datagram, with an IP
protocol number of 2. IGMP has versions IGMP v1, v2 and v3.
........................................................................................................................................................................................................................
1 Select Data -> IGMP Mng options in the Menu bar.
........................................................................................................................................................................................................................
2 Click on the Create hyperlink and the following panel appears.
Figure 5-53 IGMP Creation
........................................................................................................................................................................................................................
Table 5-15
3
Configuration Panel Parameters.
Table 5-15 IGMP Configuration Panel Parameters
Parameter
VLAN ID
Query Max Response Time [1/10s]
IGMP Status
............................................................................................................................................................................................................................................................
8DG08136EAAA
Issue 3 July 2009

"IGMP Configuration Panel Parameters"

provides description of the IGMP
Description
The entry field allows to choose the Vlan to be
associated to the IGMP instance. The Select
hyperlink allows for the selection of the
resource. After the selection procedure, the
chosen value will be reported.
The adjustable field allows to set the max
amount of time (in 1/10sec.) for the users
(hosts) to respond to a query from the Ethernet
Bridge-"Proxy" (or from the IP Router).
The entry field allows to digit if node is enabled
to support the IGMP function. Possible values:
up or down; "up" means that this 1850 TSS-320
node is enabled to support the IGMP function.
Create IGMP
5 - 7 9