Alcatel-Lucent 1850 TSS-320 User Provisioning Manual page 73

Menu bar
............................................................................................................................................................................................................................................................
– TARP Mng - Allows the user to manage the TL1 Address resolution Protocol
Alarms - Allows the operator to manage entities yield alarms when they malfunction.
•
This section deals with the configuration of ASAPs (Alarm Severity Assignment
Profile). An ASAP is a list of Alarm probable causes to which Severities Profiles are
assigned, predefined or settable by the operator.
– TCA Profile - Allows to configure and display the TCA (Threshold Crossing
– ASAP Mng - Allows to configure and display the ASAP.
– ALM CUTOFF - Allows to silence the office audible alarm indications
– ALM Resynch. - Allows to update the alarm database to the current alarm
Protection - Allows the operator to manage the available protection systems.
•
– EQPS - Allows to manage the 1:1 Equipment Protection Switching for equipment
– APS - Allows to manage the Automatic Protection Switching setting the relevant
– UPSR- Allows to manage the Unidirectional Path Switched Ring traffic
– BLSR - Allows to manage the Bidirectional Line Switched Ring traffic protection.
Synchronization - Allows the operator to manage the ports dedicated to BITS
•
(Building Integrated Timing Supply) facilities for clock distribution purposes. A BITS
output reference is a DS1 signal.
– BITS - Allows to modify the characteristics (BITS-0 as Primary and BITS-1 as
............................................................................................................................................................................................................................................................
8DG08136EAAA
Issue 3 July 2009
• Gateway Map Table - Allows the operator to manage a static entry from the
TL1 Gateway mapping table.
• NSAP Report - Instructs the NE to provide routing database information that
is supported by Layer 3 (network layer) of the OSI Data Communication
Network (DCN).
• WDM Report - Retrieves a list of all immediate OSC neighbors to the local
network element (node or NE).
• OSI NE ARE - Retrieves the parameters of a configured OSIAREA that the
NE is part of.
(TARP) parameters.
• TARP Report - Allows the user to retrieve the TL1 Address resolution
Protocol (TARP) parameters.
• TARP Cache - Allows the user to retrieve all of the current TARP Data Cache
entries.
• TARP LDB - It retrieves the TARP Loop Detection Buffer (LDB).
Alarm) profile.
situation.
unit.
configuration.
protection.
Secondary) and the outgoing port of reference clock.
• Modify BITS-0 - Allows the page to edit bit 0 related to a given shelf.
System access
3 - 1 3