Procedures
............................................................................................................................................................................................................................................................
Change the date and time of the Network Element
Purpose
This procedure allows the user to set the date and time independently of the NTP feature.
........................................................................................................................................................................................................................
Select System Management -> Network Time Protocol options in the Menu bar. The
1
following screen appears.
Figure 5-72 NTP Config
........................................................................................................................................................................................................................
2
The Time and Date panel displays the current date and current time as shown in
Figure
........................................................................................................................................................................................................................
3
The Date and Time options allows to manually set the system date and time by means of
six combo-boxes Year, Month, Day, Hour, Minute and Sec as shown in
Note:
............................................................................................................................................................................................................................................................
8DG08136EAAA
Issue 3 July 2009
5-72.
This command is not allowed if NTP is enabled.
Change the date and time of the Network Element
Figure
5-72.
5 - 1 0 7