Dcc Channel - Ne Interface Details Parameters - Alcatel-Lucent 1850 TSS-320 User Provisioning Manual

Procedures
............................................................................................................................................................................................................................................................
Figure 5-44 DCC Mode - TERMINATED
Figure 5-45 DCC Mode - CROSSCONNECTED
........................................................................................................................................................................................................................
4 Table 5-11
NE Interface Details panel parameters:
Table 5-11 DCC channel - NE interface details parameters
Parameter
Access Identifier
Lower Layer Mode
OSI Protocol
DCC Mode
Internet Protocol
............................................................................................................................................................................................................................................................
8DG08136EAAA
Issue 3 July 2009

"DCC channel - NE interface details parameters"

Description
Specifies the Access Identifier of a resource for the selected
port
Specifies the protocol used for the Layer 2 over the specified
DCC. The values are:
•
•
Specifies if the OSI protocol runs on the addressed DCC or
not. The values are:
•
•
Specifies the DCC Mode for the NE interface. The default
value is CROSSCONNECTED
Specifies the Internet Protocol for the network interface
LAPD
PPP
Y- Yes
N- No
Create DCC Channel
provides description of
5 - 7 1