............................................................................................................................................................................................................................................................

Control Plane - Signaling: Create Hoplist

Purpose

This procedure allows the operator to modify the parameters associated to OSPF on each

OSPF enabled interface over control channel termination port (DCC, LAN, or

encapsulated access via IPIP or GRE). Moreover this command can optionally provide

OSPF packet authentication with Key ID for MD5 encryption algorithm.

Select Control Plane -> CP TDM -> Signalling option in the Menu bar, then in the CP

Signaling page select the Hoplist functional tab or

Expand CTRLPLANE: CP -> TDM CP: CPTDM -> SIGNALING: CPSIG options in

the Tree area, then in the CP Signalling page click on the Hoplist functional tab. The

Create Hoplist page appears.

Figure 5-30 Hoplist Creation Page

The Create Hoplist panel contains:

Node IP Address: The entry box allows to digit the Node IP Address (Node ID) for a

•

given indexed hop. It applies to the next hop node in the routing path.

Port Access IDentifier: The entry box allows to digit the Port Access IDentifier for a

•

given indexed hop. It applies on unnumbered interface of the node in the next hop

node of the routing path. Port AID is any kind of AID facility (OC-n, VC virtual AID,

or port if index). It is translated internally into a 4 bytes integer value. For TDM

application, OC-n or VCG facilities are valid.

8DG08136EAAA

Issue 3 July 2009

Control Plane - Signaling: Create Hoplist

5 - 4 7

Table of Contents

Show Quick Links

Quick Links:
Craft Terminal Overview
Example of Network Management Architecture
Alarms Menu

Hide quick links:

Chapters

Table of Contents

This manual is also suitable for:

1850 tss-160

Control Plane - Signaling: Create Hoplist - Alcatel-Lucent 1850 TSS-320 User Provisioning Manual