............................................................................................................................................................................................................................................................

Control Plane - Signaling: Create Traffic Descriptor

Purpose

This procedure creates in the Control Plane a Traffic Descriptor to be used by control

plane SONET connections. This command provides a parameter set for control plane

TDM tunnel timeslots.

The control plane automatically assigns TD Identifier parameter (TD-ID) as result of

successful response.

For E-NNI connection, only Traffic Descriptor with switching capability = TDM or

DWDM are supported, for Packet connection only PSC is supported. Command is

rejected if matching Traffic Descriptor could not be found. Entry is only allowed when

connection is not committed (OFF) or both released and deactivated (STATUS=OFF and

STATE= DOWN).

Select Control Plane -> CP TDM -> Signalling option in the Menu bar, then in the CP

Signaling page click on the Traffic Desc functional tab or

Expand CTRLPLANE: CP -> TDM CP: CPTDM -> SIGNALING: CPSIG options in

the Tree area, then in the CP Signalling page click on the Traffic Desc functional tab. The

Create Traffic Descriptor page appears.

Figure 5-29 SIGNALLING - Traffic Desc functional tab

The Traffic Desc functional tab contains:

8DG08136EAAA

Issue 3 July 2009

Control Plane - Signaling: Create Traffic Descriptor

5 - 4 5

Table of Contents

Show Quick Links

Quick Links:
Craft Terminal Overview
Example of Network Management Architecture
Alarms Menu

Hide quick links:

Chapters

Table of Contents

This manual is also suitable for:

1850 tss-160

Control Plane - Signaling: Create Traffic Descriptor - Alcatel-Lucent 1850 TSS-320 User Provisioning Manual