Alcatel-Lucent 1850 TSS-320 User Provisioning Manual page 129

Menu bar
............................................................................................................................................................................................................................................................
Current LBO0 - Specifies the length of DS1 cable from the outgoing BITS port to
•
BITS reference point. The values are: 0 dB compensation, 0-110[feet] (0-33[m]), 110-
220[feet] (33-66[m]), 220-330[feet] (66-99[m]), 330-440[feet] (99-133[m]), 440-
550[feet] (133-166[m]) and 550-660[feet] (167-200[m]).
LBO0 - Allows to select the length of DS1 cable from the outgoing BITS port to BITS
•
reference point. The values are: 0 dB compensation, 0-110[feet] (0-33[m]), 110-
220[feet] (33-66[m]), 220-330[feet] (66-99[m]), 330-440[feet] (99-133[m]), 440-
550[feet] (133-166[m]) and 550-660[feet] (167-200[m]). The Default hyperlink
allows to recover the previously existing value or the factory default (0-110[feet] (0-
33[m])).
Current LBO1 - Specifies the length of DS1 cable from the outgoing BITS port to
•
BITS reference point. The values are: 0 dB compensation, 0-110[feet] (0-33[m]), 110-
220[feet] (33-66[m]), 220-330[feet] (66-99[m]), 330-440[feet] (99-133[m]), 440-
550[feet] (133-166[m]) and 550-660[feet] (167-200[m]). The Default hyperlink
allows to recover the previously existing value or the factory default (Actual).
LBO1 - allows to select the length of DS1 cable from the outgoing BITS port to BITS
•
reference point. The values are: 0 dB compensation, 0-110[feet] (0-33[m]), 110-
220[feet] (33-66[m]), 220-330[feet] (66-99[m]), 330-440[feet] (99-133[m]), 440-
550[feet] (133-166[m]) and 550-660[feet] (167-200[m]). The Default hyperlink
allows to recover the previously existing value or the factory default (0-110[feet] (0-
33[m])).
The panel has the Save hyperlink that is used to send the related command to the Network
Element. Automatically is loaded the Modify BITS OUT page to show update data.
Synchronization
This menu option contains the following four sub-menus:
Modify Synch. - Opens the "Modify Synchronization" page
•
Modify Out Synch. - Opens the "Modify Synchronization Outgoing" page
•
Modify Switch Synch. - Opens the Modify "Synchronization Switch" page
•
Modify Synch.
Selecting the Synchronization -> Synchronization -> Modify Synch. menu path, the
following page will appear:
............................................................................................................................................................................................................................................................
8DG08136EAAA
Issue 3 July 2009
Synchronization menu
3 - 6 9