Menu bar
............................................................................................................................................................................................................................................................
Figure 3-63 Synchronization Page- Modify Switch Synch.
The Modify Synchronization Switch panel contains the following fields:
Switch To Reference - Allows to assign the clock reference source that is to be
•
selected as the system clock synchronization source. The values are "Internal Clock",
"Primary Clock Reference" and "Secondary Clock Reference".
Command Mode - Allows to assign the command mode of "Operate" action. The
•
values are "Forced" and "Normal". The Default hyperlink near the combo-box allows
to apply the default value.
The panel has below mentioned hyperlinks:
– Operate - To operate switching outgoing synchronization resources related to a
– Release - This is used to send the related command to the Network Element.
............................................................................................................................................................................................................................................................
8DG08136EAAA
Issue 3 July 2009
given shelf.
Synchronization menu
3 - 7 3