Menu bar
............................................................................................................................................................................................................................................................
Figure 3-97 Tools - Accessing TL1 console
3. When the Telnet session is open the client area becomes as follows.
Figure 3-98 Tools - Telnet console
The lower part it is used to digit the TL1 command, while in the upper part, the answer to
the TL1 Telnet command is shown.
4. Entering the TL1 command (e.g. RTRV-ALM-ALL) and press enter. The
............................................................................................................................................................................................................................................................
8DG08136EAAA
Issue 3 July 2009
following screen appears as shown in
Figure
3-99.
Tools menu
3 - 1 1 3