Alcatel-Lucent 1850 TSS-320 User Provisioning Manual page 193

Tree area
............................................................................................................................................................................................................................................................
– Priority bits: It refers the prioritization of an Ethernet data flow on the 3 "user-
– VLAN: It refers the indexed value assigned by the system to this profile.
– Specific value: It refers the stacked-Vlan identifier that will be pushed into the
The panel has the following hyperlinks:
Cancel - To cancel the existing settings and return to the previous page.
Deactivate - To change the State field only and return to the previous page.
Delete - To remove the classifier from the list.
XConnection details
Click one of the item in the XConnection column as shown in
Figure 4-9 IN-FLOWS XConnection details
The XConnection tab displays the Data Connection panel that contains the following
parameters:
Service type - Refers UNI-UNI, or UNI-NNI, or NNI-UNI. The existing cross-
•
connections are listed into the table area.
State - This is the notification about the actual status of the resource; active (the
•
resource is in-service); not active (the resource is out-of-service).
Traffic descriptor - Refers about the traffic type. The values are: beffort (Best Effort
•
Service) or guar (Guaranteed Service) or reg (Regulated Service).
S-VID - Refers the stacked VLAN identifier associated to this InFlow.
•
............................................................................................................................................................................................................................................................
8DG08136EAAA
Issue 3 July 2009
Protocol functions) or MSTP (for "Multiple" Spanning Tree Protocol functions; in
order to manage the union of more subnetworks. In this case, a sub-network will
be treated as a single bridge. Not available in "MAC-Bridge" case. The MAC
bridge mode can be accomplished by using a "Virtual" bridge).
priority" bits (802.1p) of the "Tagged-Ethernet" frame and also on the 3 "provider-
priority" bits of the "Stacked-Vlan" frame. the range is also shown in the From:
and To: fields.
ethernet frame in the 0 to 4095 range.
LAG configuration
Figure 4-9.
4 - 1 5