Alcatel-Lucent 1850 TSS-320 User Provisioning Manual page 312

Procedures
............................................................................................................................................................................................................................................................
Remote Facility Access Identifier: The entry field allows to specify an access to the
•
facility on remote NE. This parameter must not be specified if DISCOVERY is set to
ENABLED, otherwise it must be specified.
Remote Router IP Address: The four entry fields allows to specify the neighbor
•
router IP-ADDRESS. For component TE link, the value of this parameter will be
inherited from bundle's REMOTE-ROUTERADDR. For not-component ports this
parameter must not be specified if DISCOVERY is set to ENABLED, otherwise it
must be specified. For component ports (i.e. when BUNDLE-AID is specified) this
parameter must not be specified.
Metric: The entry field allows to specify the Traffic Engineering metric for this
•
interface. Used in CSPF calculations. It corresponds to the cost of the link to be used
in path computation. This parameter isn't relevant when PORT-CLASS=UNI.
Colour (hexadecimal): The entry field allows to specify the attribute of the TE link
•
resource class. The resource class is a 32-bit field. This parameter isn't relevant when
PORT-CLASS=UNI.
Shared Risk Link Group: The entry field allows to specify the Shared Risk Link
•
Group (SRLG) that a link on this interface belongs to. Links belong to the same SRLG
if they share the same risk characteristics. A SRLG is represented by a number. Zero is
a valid SRLG number. Each SRLG is unique within an IGP domain. This SRLG-LIST
parameter is an un-ordered list of 32-bit numbers and each number represent one
SRLG. The user can define max 16 numbers (max 16 SRLG) using grouping and/or
ranging addressing. This parameter is not applicable for PORT-CLASS=UNI and it is
set to the default value.
RSVP Authentication: The combo-box allows to set for DDRP packets sent by
•
DDRP interface. It is used for security purpose. Possible values: N (MD5
authentication mode is enabled) or Y (MD5 authentication mode is enabled) or empty.
The page has the following hyperlink:
– Cancel: Allows to come back to the previous page without applying the user's
– Save: Applies the user's operation in this page.
E O
N D
........................................................................................................................................................
............................................................................................................................................................................................................................................................
5 - 52
operation.
S
F T E P S
Control Plane - Transmission: Create Bundle link
8DG08136EAAA
Issue 3 July 2009