Menu bar
............................................................................................................................................................................................................................................................
Connection menu
Purpose
The connection menu allows the operator to manage (provisioning, service type etc.) the
client/line traffic. The menu options are:
TDM - Allows to set the SONET service
•
Data - Allows to set the Point-to-Point cross-connection services. The options are:
•
– Create XC
– Search/delete XC - Allows to perform the searching and deleting procedures.
TDM
Select Connection -> TDM as shown in
Figure 3-8 Connection - TDM
The Search tab displays the Search Cross-Connections panel that contains the
following:
Search Type - Allows to select XConnection or Protection legs:
•
– Using Specific STS Type Commands (RTRV-CONF-STSn or RTRV-CRS-
– Using Circuit Identifier (RTRV-CKTID) for a searching identified by the circuit
............................................................................................................................................................................................................................................................
3 - 18
•
P2P - Allows to set Point-to-Point cross-connections.
•
PB - Allows to set Provider Bridge cross-connections.
STS-<rate>) for a searching identified by the STSn specific type declared in the
next STS Type combo-box.
identifier.
Figure
3-8.
Connection menu
8DG08136EAAA
Issue 3 July 2009