Alcatel-Lucent 1850 TSS-320 User Provisioning Manual page 81

Menu bar
............................................................................................................................................................................................................................................................
– NNI-UNI - Allows to create an XC from a Network-Interface to a User-Interface
– UNI-UNI-BIDIR - Allows to create an XC from a User-Interface to another User-
Port ethernet ingress - It is the name of the "input" Ethernet Port.
•
Port ethernet egress - It is the name of the "output" Ethernet Port.
•
TRAFFIC SECTION
•
– Ethernet traffic descriptor - It is the name of the associated "User" traffic
– Provider traffic descriptor - It is the name of the associated "Provider" traffic
CLASSIFIER SECTION
•
– Priority bits - It allows to chose the prioritization of an Ethernet data flow. Values
– VLAN - It allows to manage the VLAN Registration on the Node; i.e. the
BRIDGE MANAGEMENT
•
– S-VID - It is a setting of "Bridge management" which allows to set a name of the
– Layer 2 control frames (0x) - It allows to enable or disable the Protocol Frames.
– Policing mode - It allows to set the policing on the ETS traffic (ETS InFlow);
– Color profile - It allows indicating the name of the association between the
– VLAN pop - It allows to pop out the "Stacked-VLAN" shim fields of the ethernet
VLAN PUSH SECTION
•
– VLAN push - It allows to insert (disabled) or remove (enabled) the
USER LABEL SECTION
•
– Label inflow ethernet - It allows to indicate the user label (optional) of the inflow
............................................................................................................................................................................................................................................................
8DG08136EAAA
Issue 3 July 2009
where the NNI interface is towards the Bridge domain.
Interface, in bi-directional mode connected, passing through the Bridge domain.
descriptor (TID). This option allows to choose and associate a User traffic
descriptor to the data flow (ETS InFlow).
descriptor; This option has the same meaning of the above, but in this case the
associated TID must be "null" (for Provider InFlow).
are "dontCare", "untagged", "value" and "range".
registration of the VLAN under consideration on a group of Ports (membership)
on which this VLAN may be present (received/transmitted). Values are
"dontCare", "untagged", "value" and "range".
associated "Stacked-VLAN-ID" that will be inserted/extracted into/from the
"Provider"-Frame.
possible pull-down options are "disabled", "colorBlind" or "colorAware".
incoming S-VLAN priorities and the forwarded frames colouring (for scheduling
purposes, inside the bridge).
frame. SVLAN tags transport information used by an external provider network;
possible values: "disabled" or "enabled".
VLAN/SVLAN tags on/from the frames.
to be connected.
Connection menu
3 - 2 1