Dcc Page - Osi Ulc Report; Xc Overhead - Alcatel-Lucent 1850 TSS-320 User Provisioning Manual

Menu bar
............................................................................................................................................................................................................................................................
Figure 3-36 DCC page - OSI ULC report
The OSI Routing Configuration tab displays the OSI UPPER LAYERS
•
COMMON PARAMETERS panel that contains the following parameters:
L3ISLEVEL - This is the IS level provisioning. The values are:
•
– 1 - It is a Level 1 IS.
– 2 - It is a Level 2 IS.
The Save hyperlinks closes the page and return back to the previous page.

XC overhead

The menu contains the following information as shown in
Figure 3-37 XC Overhead
The Overhead Channel Cross Connection tab displays a list of current created XC
overhead. It displays the following items:
From: To - By clicking on the left side button, the user can select the DCC channels.
•
DCCCHNL - This shows two options:
•
– Line
– Section
This panel contains the following hyperlinks:
– Delete
– Create
IP address
This option is used to retrieve TCP/IP stack parameters. Select Xcom -> DCN Phys. If ->
IP Address option as shown in
............................................................................................................................................................................................................................................................
3 - 44
Figure 3-38.
Figure 3-37.
8DG08136EAAA
Issue 3 July 2009
Xcom menu