Alcatel-Lucent 1850 TSS-320 User Provisioning Manual page 197

Tree area
............................................................................................................................................................................................................................................................
Primary/secondary state - Specifies the primary and secondary service state.
•
The table displays the following details relevant to the rack:
Shelf - This column lists all the available shelf/shelves of the rack.
•
Resource - In this column is specified the access identifier of the shelf/shelves (type
•
and position). It is also shown in the tree. The allowable values are:
– SWTCH Shelf Type TDM and packet switch
– ROADM Shelf Type WDM ROADM
– UROADM Shelf Type In-Service Upgraded WDM
– ILA In-Line Amplifier Shelf Type and Repeater Node
– UILA In-Line Upgradeable Amplifier Shelf Type and Repeater Node
– OMD Optical Multiplexer Demultiplexer Shelf Type
PST - Specifies the primary state of the shelf.
•
SST - Specifies the secondary state of the shelf.
•
Provisioned - Specifies the name of the shelf. It is also shown in the tree.
•
Actual - Specifies the physically equipped shelf type.
•
In the upper part of the page there are some tabs (alarms, equipment and Rack x). Clicking
on the equipment tab the client area shows the actual rack layout as depicted in the
following.
Figure 4-13 Rack layout page
............................................................................................................................................................................................................................................................
8DG08136EAAA
Issue 3 July 2009
Overview
4 - 1 9