Tree area
............................................................................................................................................................................................................................................................
•
IGMP Properties functional tab
Figure 4-33 IGMP Properties
The IGMP Properties functional tab displays the IGMP Properties panel which consists
of the following items:
Port ID - Displays the port ID.
•
Port Name - Displays the port name.
•
From: To: - Displays a range from 1 to 50.
•
The panel has the Search hyperlink to start the searching procedure.
PHYSICAL functional tab (for Ethernet Bridge System)
The Rack x > Shelf x > Board xx > Module xx > Port xx tab page presents the PHYSICAL
functional tab.
The PHYSICAL functional tab is made up of seven panels:
State panel
•
It has the same parameters previously described.
Loopback panel
•
It has the same parameters previously described.
Ethernet port panel
•
............................................................................................................................................................................................................................................................
4 - 56
disabled means that this one is not the Port towards the IP Multicast Router.
Note: This association is performed for one VLAN at a time; if more VLAN's are
to be associated to IGMP by means of this port, the operation must be repeated for
each VLAN.
The panel has the Save & Exit hyperlink in order to save the settings and leave the
page.
Access a resource
8DG08136EAAA
Issue 3 July 2009