Alcatel-Lucent 1850 TSS-320 User Provisioning Manual page 155

Menu bar
............................................................................................................................................................................................................................................................
Figure 3-82 System management - network time protocol configuration
The page contains the Time and Date panel and Network Time Protocol panel.
The Time and Date panel shows the following information:
– Current Date - Displays the current date.
– Current Time - Displays the current time.
The Date and Time options allows to manually set the system date and time by means
of six combo-boxes Year, Month, Day, Hour, Minute and Sec.
The Network Time Protocol panel shows the following information
– Current NTP Server Synchronization - The time synchronization from the NTP
– Current Offset - The time offset to apply to NTP server UTC time, +/- HH-MM,
– Current Operating Mode - The current operating mode of the NTP service. The
............................................................................................................................................................................................................................................................
8DG08136EAAA
Issue 3 July 2009
server; The value is Enabled or Disabled.
for all events and time stamps reported by this NE. Factory default is +00-00
values are:
• FREE-RUNNING NTP is not enabled, and the NE is not synchronized to an
NTP server and is instead using its own internal clock as a source.
• HOLDOVER NTP is enabled but the NE has lost NTP server connectivity,
and is using the last known clock update to synchronize its clock.
System management menu
3 - 9 5