Alcatel-Lucent 1850 TSS-320 User Provisioning Manual page 256

Tree area
............................................................................................................................................................................................................................................................
2. Trail Trace Info panel
•
•
The Default value is: <Previously-existing value> Null character (15 bytes each with
hex value 00) initially set by the system for line AID or <Previously-existing value>
for client AID.
•
The Default value is: <Previously-existing value> Null character (15 bytes each with
hex value 00) initially set by the system for line AID or <Previously-existing value>
for client AID.
OC Trace Comparison: This parameter enables and disables section Trace Identifier
MisMatch (TIMM) defect detection (i.e., enables and disables comparison between
the actual incoming SAPI (INC_SAPI) and the provisioned expected incoming SAPI
(EXP_SAPI). This parameter does not apply to the OT2TDM module. The allowable
values are:
– ENABLE: Allows to enable compare
– DISABLE: Allows to disable compare
The Default value is: <Previously-existing value> DISABLE initially set by the
system.
•
– ENABLE: Allows to enable TIMM defect detection
– DISABLE: Allows to disable TIMM defect detection
The Default value is: <Previously-existing value> DISABLE initially set by the
system for line AID or <Previously-existing value> for client AID.
•
This parameter does not apply to the OT2TDM module. The allowable values are:
– UFAIS inserting a 128 bit unframed AIS
– FAIS inserting framed AIS-L/MS-AIS
............................................................................................................................................................................................................................................................
4 - 78
Access Identifier: It shows the entity access identifier in the <OTPORT>- <rack>-
<shelf>-<slot>-<side> format.
TX_SAPI: Transmit Source Access Point Identifier. This parameter determines
the Transmit TTI channel content of the Section Monitoring overhead of an OTUk
information structure or the Path Monitoring overhead of the OTUkP information
structure. The allowable values are: 15 ASCII characters, enclosed in quotation
marks.
EXP_SAPI: Expected incoming Source Access Point Identifier (EXP_SAPI).
This parameter does not apply to the OT2TDM module.
OCP Trace ID mismatch resp: Optical Channel Path Trace Identifier Mismatch
Response. This parameter determines whether an OT will take a Consequent
Action (or pass the received optical channel. upon detection of an optical channel
path trace mismatch at its input. For the line side, the consequent action is "laser
shut off", "insert unframed AIS", or "insert framed AIS" depends on the parameter
OC signal defect response. The allowable values are:
OC signal defect response: This parameter determines how an OT which is
sending its output to external equipment will respond to one of the detected defects
at its line side input. Namely whether the OT will respond by 1) inserting 128bit
unframed AIS (UFAIS), 2) inserting framed AISL/MS-AIS (FAIS), or 3) shutting
off the laser(s) (OFF). This parameter apply only to the line side.
Access a resource
8DG08136EAAA
Issue 3 July 2009