Create Upsr - Alcatel-Lucent 1850 TSS-320 User Provisioning Manual

Procedures
............................................................................................................................................................................................................................................................

Create UPSR

Purpose
This procedure allows the operator to create an FFP that associates a Protecting or East
OC-192 facility with a Protected or West facility. When multiple facilities are supported
by module, grouping facility number on EAST and the facility number on the WEST
module must be same. i.e., port 1 OCn facility on EAST must be paired with port 1 WEST.
Similarly port 2 on EAST must be paired with port 2 on WEST facility to form a BLSR2
group.
For UPSR, the STS1/STSxC facilities within the OC-n that is designated to be the
Protected/WEST facility are designated as the Preferred facilities. The STS1/STSxC
facilities within the OC-n that is designated to be the Protecting/EAST facility are
designated as the alternate STS1/STSxC facilities. The preferred/alternate designation can
be modified via the ENT-CRS and ED-CRS- commands.
........................................................................................................................................................................................................................
Select Protection -> UPSR options in the Menu bar.
1
........................................................................................................................................................................................................................
Clicking on Create the following panel appears:
2
Figure 5-61 UPSR Creation
........................................................................................................................................................................................................................
3 The panel has the same parameters as described in
Panel
........................................................................................................................................................................................................................
4 Click Save to save the settings and return to the previous page.
........................................................................................................................................................................................................................
Click Cancel to revoke all the settings and return to the previous page.
5
E
N D
........................................................................................................................................................
............................................................................................................................................................................................................................................................
8DG08136EAAA
Issue 3 July 2009
Parameters".
O S
F T E P S
Table 5-21 "APS Configuration
Create UPSR
5 - 9 3