System Management - In-Service Upgrade - Remove In-Service Upgrade - Alcatel-Lucent 1850 TSS-320 User Provisioning Manual

Menu bar
............................................................................................................................................................................................................................................................
After successful completion of this command, all software/database indicators are set to
indicate that the current release is now the permanently active one. The system remains in
service on the currently active release and all system functionality remains operational.
Select System Management -> Initialize and Upgrade -> In-Service Upgrade ->
Remove Old Upgrade as shown in
Figure 3-69 System management - In-service upgrade - Remove In-Service upgrade
The panel shows the status of the in-service upgrade. The possible status are the same
described in
Service Upgrade field.
The panel has the Apply hyperlink that is used to remove the old upgrade process.
DB management
An NE maintains all its configuration in a volatile memory database. Non-volatile disk
backup databases are maintained implicitly by the NE, and explicitly by operator
commands. The NE is able to restore its memory database from the contents of a disk
backup database at restart time or triggered by an operator command.
The NE provides mechanisms to transfer a locally stored disk database backup to an RFS
and vice versa.
The NE allows operator to reset its memory and primary backup database to a factory
installed default configuration.
The volatile memory database is maintained by the NE and reflects the NE configuration,
its alarm states and conditions. Two non-volatile disk database types exist for the NE: The
primary backup database and the secondary backup data base.
The primary backup database is maintained implicitly by the NE during its normal
operation. At any time, it reflects the state of the NE's volatile memory database. Updating
the primary backup database occurs online without interrupting the NE's normal service
operation.
The primary backup database can be copied to the secondary backup database by an
operator command.
............................................................................................................................................................................................................................................................
8DG08136EAAA
Issue 3 July 2009
In-service upgrade and start
Figure 3-69.
upgrade, but it presents the Remove In-
System management menu
3 - 7 9