Connection - Data - Create Xc - Pb - Alcatel-Lucent 1850 TSS-320 User Provisioning Manual

Menu bar
............................................................................................................................................................................................................................................................
Click Select button it is possible to select one of the destination port.
Front in label - The entry box allows to digit the user label for the Inflow input
•
direction.
Front out label - The entry box allows to digit the user label for the Inflow output
•
direction.
Back in label - The entry box allows to digit the user label for the Outflow input
•
direction.
Back out label - The entry box allows to digit the user label for the Outflow output
•
direction.
Select Connection -> Data -> Create XC -> PB as shown in
Figure 3-10 Connection - Data - Create XC - PB
The Provider data connection page contains the following parameters:
Topology - Allows choosing of XC type. Following are the possible options:
•
– UNI-UNI - Allows to create an XC from one User-Interface to another User-
– UNI-NNI - Allows to create an XC from one User-Interface to a Network-
............................................................................................................................................................................................................................................................
3 - 20
Interface, passing through the Bridge domain.
Interface, where the NNI interface is towards the Bridge domain.
Connection menu
Figure 3-9
8DG08136EAAA
Issue 3 July 2009