System Management - Restore Db - Alcatel-Lucent 1850 TSS-320 User Provisioning Manual

Menu bar
............................................................................................................................................................................................................................................................
Figure 3-72 System management - restore DB
The Database panel displays the Restore Database panel that contains the following:
Command Mode - Allows to assign the command mode of the action. The values are:
•
– Forced - The database restoration operation is performed regardless both the
The software release identifier indicated for the secondary backup database does not
match the software release identifier indicated for the system.
– Normal - The command is denied if there is a mismatch between the SID, the
Click Default hyperlink, the Normal mode is set.
Click Apply, to activate the selected operation as shown below:
............................................................................................................................................................................................................................................................
8DG08136EAAA
Issue 3 July 2009
BACKUP-DATE, BACKUP-TIME indicated for the secondary backup database is
older/prior to the BACKUP-DATE, BACKUP-TIME on the system (represented
in label of the Active Local Primary Hard disk Database) and the SID indicated on
the STBY DB does not match the SID of the system.
software release identifier, system type or the backup time stamp of the system and
the information stored in the secondary backup database.
System management menu
3 - 8 3