Create Gateway Map Table; Enter Gateway Map Table Entry Parameters - Alcatel-Lucent 1850 TSS-320 User Provisioning Manual

Procedures
............................................................................................................................................................................................................................................................

Create Gateway Map Table

Purpose
This procedure allows the operator to change a static entry in the TL1 Gateway mapping
table. The TL1 Gateway mapping table associates Target Identifiers (TIDs) with IP
address / raw terminal port pairs. Note that at least one of these two parameters (IP address
and raw terminal port) shall be provided.
........................................................................................................................................................................................................................
1 Select Xcom -> Network Domain -> Gateway Map Table option in the Menu bar.
........................................................................................................................................................................................................................
2 Clicking on Create hyperlink, the ENTER GATEWAY MAP TABLE ENTRY window
appears:
Figure 5-57 ENTER GATEWAY MAP TABLE ENTRY Page
........................................................................................................................................................................................................................
3 Table 5-18
description of the window panel.
Table 5-18 ENTER GATEWAY MAP TABLE ENTRY Parameters
Parameter
NE TID (Network Element
Target Identifier)
IP ADDRESS (Internet
Protocol address)
PORT (IP Port)
........................................................................................................................................................................................................................
Click Cancel to revoke all the settings and return to the previous page.
4
............................................................................................................................................................................................................................................................
5 - 86

"ENTER GATEWAY MAP TABLE ENTRY Parameters"

Description
It is the TID of the NE to be changed in the Gateway mapping
table.
It is the IP address (in the format nnn-nnn-nnn-nnn) of the remote
NE in the mapping table entry.
It is the associated IP port of the TL1 raw-mode server on the
remote NE to be changed in the mapping table.
Create Gateway Map Table
provides the
8DG08136EAAA
Issue 3 July 2009