Menu bar
............................................................................................................................................................................................................................................................
with a software release identifier mismatch
•
with a SID mismatch
•
with a time stamp mismatch
•
During the database download operation, CRC checks are performed. If one check fails,
the operation fails.
Table 3-4 Valid AID / input parameters combinations
From
Secondary backup database
Remote File Server Database
Remote File Server Software
Select System Management -> DB Management -> Remote File -> Perform Copy as
shown in
Figure 3-76 System management - copy remote file
The Remote File tab displays the Copy Remote File panel that contains the following
parameters:
From - The combo-box supports the following input parameters:
•
– Secondary Backup Database (STBYDB) - The system's secondary backup
............................................................................................................................................................................................................................................................
8DG08136EAAA
Issue 3 July 2009
Figure
3-76.
database. It represents the secondary backup database that has been either created
as copy of the primary backup database (by the Perform DB Backup option), or has
been downloaded from RFS (by this option). A secondary backup database
becomes the active database only by being activated via the Restore Database
option. There is one instance of secondary backup database in the system.
To
Remote File Server Database
Secondary backup database
Standby software generic
System management menu
Valid Parameter(s)
Location, [Overwrite]
Location, [Command Mode]
Location, [Overwrite]
3 - 8 7