Tree area
............................................................................................................................................................................................................................................................
– Delete: By clicking this hyperlink all the operation are deleted and the user can
– Save: By clicking this hyperlink all the operation are applied and the user goes
– Restore: Allows to restore the previous settings.
2. Section Trace panel
Access Identifier: It identifies the entity access identifier in the <OTPORT>- <rack>-
•
<shelf>-<slot>-<side> format.
Incoming Message Format: It allows to set the format in which to display the
•
incoming trace message. Possible choices are:
– TEXT Text incoming trace message
– HEX Hexadecimal incoming trace message
– The default value is TEXT.
3. Loopback panel
Access Identifier: It identifies the entity access identifier in the <OTPORT>- <rack>-
•
<shelf>-<slot>-<side> format.
Location: It allows to set the location in which the loopback is performed. Possible
•
choice is Near End
Loopback Type: It allows to set the type of loopback. Possible choices are
•
– FACILITY Loopback at the receive side (from the client equipment or a DWDM
............................................................................................................................................................................................................................................................
4 - 70
restart for new settings.
back to the previous page.
The panel has the Retrieve Section Trace hyperlink. Clicking on it, the following
window opens.
line) to the transmit side (toward the client equipment or DWDM line) of the
specified facility.
Access a resource
8DG08136EAAA
Issue 3 July 2009