Procedures
............................................................................................................................................................................................................................................................
Figure 5-20 DDRP NEIGHBOR
........................................................................................................................................................................................................................
2
The page contains a table and a panel. The table with check box which allows to select
(validated check box) or not select (blank check box) an access identifier (AID) with the
relevant router quantity.
Table 5-6 DDRP NEIGHBOR tab
Parameter
AID
ROUTER
............................................................................................................................................................................................................................................................
5 - 30
Description
It specifies a physical access to the OC-N facility (N = 3, 12,
48, 192) or a Virtual link. Possible value are:
ALL (ALL AID)
•
OC12-{1-7}-{1-9}-{2-9,12-19,21-36}-{1-8} (OC-12)
•
OC3-{1-7}-{1-9}-{2-9,12-19,21-36}-{1-8} (OC-3)
•
OC48-{1-7}-{1-9}-{2-9,12-19,21-36}-{1-3, 5, 7} (OC-
•
48)
OC192-{1-7}-{1-9}-{2-9,12-19,21-36}-1 (OC192)
•
IPIP-{1-300000} (Virtual Link using IPover IP
•
encapsulation)
GRE-{1-300000} (Virtual Link using GRE
•
encapsulation)
VAID-{1-300000} (Virtual Link associated to logical
•
InFiber-OutOfBand port)
(Neighboring Router Identifier in the Autonomous System).
It is represented as a type IP v4 Address. Possible value are:
{1-99, 101-126, 128-223}-{0-255}-{0-255}-{1-254}
Control Plane - Configure OSPF and DDRP
Issue 3 July 2009
8DG08136EAAA